Posted on 4 Comments

Creating a multi-pieced pleated panel for Della

creating multi-color pleats for Della Wallet
Multicolor pleated panel

Oh Della….what fun we can have with you!!  Please visit the Swoon Sewing Patterns website to purchase the pattern so you can create your own unique Della Wallet Clutch!!

Look how much fun you can have with fabric if you split up the pleated panel with different fabrics.  I like to split pleats because it makes creating the pleat much easier and the pleat is much crisper.

 

 

At step 6 in the Della instructions, instead of having one long piece of fabric you will need to create each section for pleating including the fusible interfacing.

From the fabric you will need to cut

-2 pieces 2 ½ inches by 8 ½ inches

-4 pieces 4 ¾ inches by 8 ½ inches

-1 piece 11 ¼ inches by 8 ½ inches

 

From the fusible woven interfacing you will need to cut

-2 pieces 2 ¼ inches by 8 ½ inches

-4 pieces 4 ¼ inches by 8 ½ inches

-1 piece 10 ¾ inches by 8 ½ inches

First fuse the interfacing to the wrong side of each piece centering it so there is a ¼ inch seam allowance along the 8 ½ inch edge of each piece.  Each small 2 ½ inch piece of fabric will only need a ¼ inch seam allowance along one of the 8 ½ inch edges.

press fusible woven interfacing to wrong side of pieces
interfacing with seam allowance

Arrange your pieces so you have 1 small piece on each end, 2 medium pieces next to each of those with the largest piece in the center.

arrange the multi-colored panel
arrange pieces

Match the edges with seam allowance right sides together.  Pin or clip in place.  I like to use lots of clips because I cannot poke my fingers with them!!

match edges with lots of clips
use pins or clips to match edges along 8 1/2 inch side

Stitch your edges together with 1/4 inch seam allowance getting close to the interfacing, but, try not to stitch on the interfacing as it may bulk up the finished pleat.

stitch close to interfacing
seam allowance

From the wrong side, press each seam to set.

press seam flat to set
setting the seam

From the right side, press the seam allowances to one side.

press seam allowance to one side
pressing seam to one side

Press each seam with wrong sides together trying to create a straight pleat with the seam centered and fabric on each side.

 

press seam to create pleat
pressing pleat at seam

Topstitch each pleat at 1/8 inch from pressed edge.

topstitch each pressed seam
topstitch each pressed seam

You now have the panel with pleats and are ready to mark and finish following the pattern instructions.

You can continue with the pattern instructions where it says…

“Now, fold the entire Pleated Panel……”

I have created a PDF file for download if you want to try creating the split panel for Della while offline.  Get the tutorial in PDF here.